Single Side AR Coated PMMA
Single Side AR Coated PMMA

BHT-K0H2B1xx, xx=thickness choices

Single Side AR Coated PMMA



Displays would be value up after AR processes at the front side of the protector, especially for some special bounding technical, touch panel, etc., application. This may not only solving light reflection problem from the back light, but also much lighter reflection from the outer environment through AR coated surface. 

Product Structure


1. High transparence, low reflection at the coated side.
2. Optical grade PMMA with 1 side vapor depositedAnti Reflective coating.
3. Close to neutral coating color.
4.Total transparence above 96% within whole view area
5. Anti scratch, abrasion resistance.


Characteristics Method Result
OPTICAL Transparence JISK7105 96%
Reflection JISK7105 ≦0.2
MECHANICAL Hardness Pencil Hardness 6H
Abrasion Resistance Steelwool,1.5kgf, 50 times Scratch line few
Adhesion (Initial) Cross cut test 100/100
Impact Strength DIN 53453 4kJ/m2
ENVIRONMENT Humidity Resistance 60°C, 95% Humidity Up to 1,000 hrs
Heat Resistance 80°C Up to 1,000 hrs
Heat Impact Resistance - 30°C & 80°C Up to 500 times


Size (mm)
275x360,310x380,385x500,420x530, 430x630, 600x1000

Thickness (mm)
0.5, 0.65, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 8.0

Anti-Reflective Spectrum (PMMA, AR+AFP)